Product Description
Rodlars large displacement permanent magnet frequency 110KW screw air
compressor for large industrial
Products Description
| Product Parameters of CZPT Permanent Magnet Frequency Screw Air Compressor | |||||||||
| Model | Motor Power | Pressure | Capacity | Noise Level | Outlet Pipe Diameter | Net Weight | Dimensions | Lubricating oil capacity | |
| KW | HP | Bar | m3/min | DB | Inch | Kgs | L*W*H(mm) | L | |
| LS-10APM | 7.5 | 10 | 7 | 1.2 | 66±2 | G ½ | 130 | 900*640*850 | 10 |
| 8 | 1.1 | ||||||||
| 10 | 0.95 | ||||||||
| 12 | 0.8 | ||||||||
| LS-15APM | 11 | 15 | 7 | 1.65 | 68±2 | G ¾ | 200 | 1000*750*1571 | 18 |
| 8 | 1.5 | ||||||||
| 10 | 1.3 | ||||||||
| 12 | 1.1 | ||||||||
| LS-20APM | 15 | 20 | 7 | 2.5 | 68±2 | G ¾ | 210 | 1000*750*1571 | 18 |
| 8 | 2.3 | ||||||||
| 10 | 2.1 | ||||||||
| 12 | 1.9 | ||||||||
| LS-25APM | 18.5 | 25 | 7 | 3.2 | 68±2 | G1 | 280 | 1100*850*1200 | 18 |
| 8 | 3 | ||||||||
| 10 | 2.7 | ||||||||
| 12 | 2.4 | ||||||||
| LS-30APM | 22 | 30 | 7 | 3.8 | 68±2 | G1 | 300 | 1100*850*1200 | 18 |
| 8 | 3.6 | ||||||||
| 10 | 3.2 | ||||||||
| 12 | 2.7 | ||||||||
| LS-40APM | 30 | 40 | 7 | 5.3 | 68±2 | G1 | 340 | 1100*850*1200 | 18 |
| 8 | 5 | ||||||||
| 10 | 4.5 | ||||||||
| 12 | 4 | ||||||||
| LS-50APM | 37 | 50 | 7 | 6.8 | 68±2 | G1-½ | 430 | 1250*1000*1345 | 30 |
| 8 | 6.2 | ||||||||
| 10 | 5.6 | ||||||||
| 12 | 5 | ||||||||
| LS-60APM | 45 | 60 | 7 | 7.4 | 72±2 | G1-½ | 460 | 1250*1000*1345 | 30 |
| 8 | 7 | ||||||||
| 10 | 6.2 | ||||||||
| 12 | 5.6 | ||||||||
| LS-75APM | 55 | 75 | 7 | 10 | 72±2 | G2 | 820 | 1700*1200*1630 | 65 |
| 8 | 9.6 | ||||||||
| 10 | 8.5 | ||||||||
| 12 | 7.6 | ||||||||
| LS-100APM | 75 | 100 | 7 | 13.4 | 72±2 | G2 | 950 | 1700*1200*1630 | 65 |
| 8 | 12.6 | ||||||||
| 10 | 11.2 | ||||||||
| 12 | 10 | ||||||||
| LS-120APM | 90 | 120 | 7 | 16.2 | 72±2 | G2 | 1190 | 1700*1200*1630 | 75 |
| 8 | 15 | ||||||||
| 10 | 13.8 | ||||||||
| 12 | 12.3 | ||||||||
| LS-150APM | 110 | 150 | 7 | 21 | 75±2 | G2-½ | 1550 | 2300*1470*1840 | 90 |
| 8 | 19.8 | ||||||||
| 10 | 17.4 | ||||||||
| 12 | 14.8 | ||||||||
| LS-175APM | 132 | 175 | 7 | 24.5 | 75±2 | G2-½ | 1550 | 2300*1470*1840 | 90 |
| 8 | 23.2 | ||||||||
| 10 | 20.5 | ||||||||
| 12 | 17.4 | ||||||||
| LS-200APM | 160 | 200 | 7 | 28.7 | 75±2 | G2-½ | 2900 | 2300*1470*1840 | 110 |
| 8 | 27.6 | ||||||||
| 10 | 24.6 | ||||||||
| 12 | 21.5 | ||||||||
| LS-250APM | 185 | 250 | 7 | 32 | 75±2 | DN100 | 3200 | 3600*2100*2190 | 110 |
| 8 | 30.4 | ||||||||
| 10 | 27.4 | ||||||||
| 12 | 24.8 | ||||||||
| LS-300APM | 220 | 300 | 7 | 36 | 82±2 | DN100 | 4000 | 3600*2100*2190 | 125 |
| 8 | 34.3 | ||||||||
| 10 | 30.2 | ||||||||
| 12 | 27.7 | ||||||||
| LS-350APM | 250 | 350 | 7 | 42 | 82±2 | DN100 | 4500 | 3600*2100*2190 | 150 |
| 8 | 40.5 | ||||||||
| 10 | 38.2 | ||||||||
| 12 | 34.5 | ||||||||
| LS-430APM | 315 | 430 | 7 | 51 | 82±2 | DN100 | 6000 | 3600*2100*2190 | 150 |
| 8 | 50.2 | ||||||||
| 10 | 44.5 | ||||||||
| 12 | 39.5 | ||||||||
| LS-480APM | 355 | 480 | 7 | 64 | 84±2 | DN100 | 6500 | 3600*2100*2190 | 150 |
| 8 | 61 | ||||||||
| 10 | 56.5 | ||||||||
| 12 | 49 | ||||||||
| LS-540APM | 400 | 540 | 7 | 71.2 | 84±2 | DN100 | 7200 | 3600*2100*2190 | 180 |
| 8 | 68.1 | ||||||||
| 10 | 62.8 | ||||||||
| 12 | 52.2 | ||||||||
| Remarks: | |||||||||
| 1.The exhaust volume is measured under the rated exhaust pressure, according to the national standard GB3853 test (equivalent to ISO1217 appendix C). | |||||||||
| 2.Recommend frequency 30-100%. | |||||||||
| 3.The above data is based on the standard grid-380V/50HZ. | |||||||||
Non-standard customization service support
Please make further inquiry for the non-standard specification type and machines which
are used under high or low temperature, high humidity,dusty working environment etc.
Details Images
Motor
1.IEC high efficiency drive motor
2.IP54 and high temperature F class rating
Controller
1.Easy to use and maintenance free
2.Constant readout of pressure and temperature
3.Provides 24 hours automatic start-stop operation
Inlet valve
The unique design differential pressure valve provide rapid response under any
condition and maintains the set differential pressure between the inlet pressure
and outlet pressure.100% modulating inlet valve to match system air demand.
Filtration system
Ultra efficient Kerry inlet air filters provide clean air that traps dirt particals to
less than 3 microns.
Electrical control protection
1.Phase protectiom
2.Phase sequence protection relay
3.High discharge temperature shutdown
4.Auto-dual control
5.Overload start protection
Company Profile
Luosi Technology Co., Ltd.,one of Biggest Air Compressor Manufacture with 33 years focus
in air Compressor in China.We are specialized in R&D, manufacturing, sales and service of air
compressors and supporting equipment.With over 20,000 square meters morden workshop,one
whole digital inspection line, 3 air compressor line, all with advanced automatic production equipment.We have air compressor technology research and development, manufacturing,
quality, logistics, operation, marketing, and after-sales service departments.
Our company mainly produces screw air compressor, permanent magnet variable frequency air compressor, two-stage permanent magnet air compressor, special laser cutting air compressor,
high and low pressure air compressor, air post-processing equipment (frozen dryer, adsorption
dryer, QPS precision machine, filter, etc.), gas storage tank and supporting parts.Our company
offers variety of products which can meet your multifarious demands.
We adhere to the management principles of “quality first, customer first and credit-based” since
the establishment of the company and always do our best to satisfy potential needs of our
customers. Our company is sincerely willing to cooperate with enterprises from all over the world
in order to realize a CZPT situation since the trend of economic globalization has developed with anirresistible force.
Certification
FAQ
Q1:Are you a manufactures or trading company?
A1:We are professional manufacture of Screw air compressor of HangZhou
(Close to HangZhou) ,33 years of focus in Air Compressor.
Q2:What’s your Delivery Time?
A2:Generally 10days.If it is an urgently or Non-standard order, please contact us in advance.
Q3:How long is your air compressor warranty?
A3:One year for the whole machine and 2 years for screw air end, except consumable
spare parts.
Q4:How many Screw Air Compressor do you produce everyday?
A4:We can produce 300 pieces everyday.
Q5:Can you use our brand?
A5:Yes, Both OEM & ODM service can be accepted.
Q6:How long could your air compressor be used?
A6:Generally, more than 10 years.
Q7:What’s payment term?
A7:T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept
USD, RMB, Euro and other currency.
Q8:How about the maintenance?
A8:First maintenance need to be done after 500Hours, and then every 2000-3000 hours
to do the normal maintenance, and consider the actual environment.
Q9:How do you control quality ?
A9:1.The raw materials are strictly inspected
2.Each compressor must pass at least 5 hours of continuous testing before leaving
the factory.
Payment and Shipping
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
