Tag Archives: compressor industrial

China Industrial Stationary Electronic Ordinary Frequency Air/Water Cooling Oil-Lubricated Rotary Screw Type Air Compressor

Product Description

To ensure product stability and reliability, Runnungway uses cutting-edge processing equipment from around the world, and it is constantly introducing high-tech, high-quality items to the market. To produce the highest quality air compressors, first-class assembly and testing equipment, as well as exquisite craftsmanship, are used.
The air end includes 2 separate compression units and a big rotor that rotates slowly. It has high efficiency, low noise, low vibration, and high reliability, as well as a low compression ratio in each stage, less leakage, and increased volume efficiency. Two units carry the load at the same time and with the same power, decreasing stress on each bearing and increasing the part’s life.
The motors are permanent magnet motors with an IP54 rating for great efficiency and energy conservation. They’ve been picked with care to fulfill the requirements of air compressor applications. In order to optimize motor efficiency and power factors while the motor is loaded, both torque and load must meet a specified design criterion. In comparison to other motors, the increased coefficient provides a 5 to 8% advantage.

Product Parameters

Model	Pressure		Capacity		Power		Outlet Pipe Diameter	Noise	Dimension			Weight
Model	bar(g)	psig	m3/min	cfm	kw	hp	mm	dB(A)	L(mm)	W(mm)	H(mm)	kg
RH7.5-7A	7	101	1.2	42.38	7.5	10.05	Rp1/2	68	900	700	900	200
RH7.5-8A	8	116	1.1	38.85
RH7.5-10A	10	145	1	35.31
RH7.5-12A	12	174	0.8	28.25
RH11-7A	7	101	1.7	60.03	11	14.75	Rp3/4	68	1100	750	1000	310
RH11-8A	8	116	1.5	52.97
RH11-10A	10	145	1.3	45.91
RH11-12A	12	174	1.1	38.85
RH15-7A	7	101	2.5	88.29	15	20.11	Rp3/4	68	1100	750	1000	320
RH15-8A	8	116	2.3	81.22
RH15-10A	10	145	2.1	74.16
RH15-12A	12	174	1.9	67.10
RH22-7A	7	101	3.7	130.66	22	29.49	Rp1	70	1100	850	1200	450
RH22-8A	8	116	3.6	127.13
RH22-10A	10	145	3.2	113.01
RH22-12A	12	174	2.7	95.35
RH30-7A	7	101	5.3	187.17	30	40.21	Rp1	72	1200	1000	1400	530
RH30-8A	8	116	5.0	176.57
RH30-10A	10	145	4.5	158.92
RH30-12A	12	174	4.0	141.26
RH37-7A	7	101	6.8	240.14	37	49.60	R1.1/2	72	1200	1000	1400	660
RH37-8A	8	116	6.2	218.95
RH37-10A	10	145	5.6	197.76
RH37-12A	12	174	5.0	176.57
RH45-7A	7	101	8.0	282.52	45	60.32	R1.1/2	74	1500	1000	1350	730
RH45-8A	8	116	7.3	257.8
RH45-10A	10	145	6.6	233.08
RH45-12A	12	174	6.0	211.89
RH55-7A	7	101	10.0	353.15	55	73.73	Rp2	74	1800	1250	1700	1130
RH55-8A	8	116	9.2	324.89
RH55-10A	10	145	8.5	300.17
RH55-12A	12	174	7.6	268.39
RH75-7A	7	101	13.4	473.22	75	100.54	Rp2	80	1800	1250	1700	1350
RH75-8A	8	116	12.6	444.96
RH75-10A	10	145	11.2	395.52
RH75-12A	12	174	10.0	353.15
RH90-7A	7	101	16.2	572.10	90	120.64	Rp2	85	2000	1250	1700	1550
RH90-8A	8	116	15.0	529.72
RH90-10A	10	145	13.8	487.34
RH90-12A	12	174	12.3	434.37
RH110-7A	7	101	21.0	741.61	110	147.45	R2.1/2	85	2300	1500	1850	1780
RH110-8A	8	116	19.8	699.23
RH110-10A	10	145	17.4	614.48
RH110-12A	12	174	14.8	522.66
RH132-7A	7	101	24.5	865.21	132	176.94	R2.1/2	85	2300	1500	1850	2000
RH132-8A	8	116	23.2	819.30
RH132-10A	10	145	20.5	723.95
RH132-12A	12	174	17.4	614.48

Detailed Photos

Types of Air Compressors

There are many types of Air Compressors available on the market. Learn which 1 is right for your needs and what makes 1 better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which 1 you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.
air-compressor

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in 1 stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use 1 of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
air-compressor

Single-stage models

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use 2 stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, 1 piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the 2 pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

Low-noise models

Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These 2 features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
air-compressor

Oil-free models

A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated 1 include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China Industrial Stationary Electronic Ordinary Frequency Air/Water Cooling Oil-Lubricated Rotary Screw Type Air Compressor

China China Made High Efficiency Industrial Air Compressor for Electric Power Industries

Product Description

Screw type air compressor structure of a unique design, a compact, stylish appearance, high efficiency, small energy consumption, low noise characteristics and long life, is a smart environment-friendly products. Widely applied in metallurgy, machinery, chemicals, and mining, and electric power industries of the ideal gas source equipment.
Advantage:
1.The third generation of advanced rotor and concise intake control system.
2.Efficient centrifugal separator oil and gas, gas oil content is small,tube and core of long life.
3. Efficient, low noise suction fan of the full use of export dynamic pressure
    increased effect of heat transfer (air-cooled).
4. Automatic water-cooling system for large air compressor to provide more efficient.
5.Fault diagnosis system, the control panel is easy to operate.
6 Removable door, equipment maintenance, service convenient.
7.Micro-electronic processing so that temperature, pressure and other parameters are closely monitored.
PRODUCT HIGHLIGHTS
1.The brand power,reliable quality, stable performance.The harsh thermal equilibrium serviceability can guarantee that the machine work effectively under high temperature environment  (≤40ºC).
2.Unique patent design, light load startup system, the air control design is adapt to the  drilling work with high stability.
3.Efficient cooling system, divided into 3 parts: water- cooled ,mid- cold, oil cold, which ensure the reliable operation of diesel engine, and it’s suitable for high temperature working environment.
4.Independent research and development of the opposite door design, rational layout, which is easy to do regular maintenace ,with advantages of the fixed and portable compressor.
5.A single point lifting, forklift hole device, equipped with drag ring.It is suitable for repair car transport, easy to transfer and installation of the unit.
6.Waterproof and dustproof design, which is suitable for outdoor hard working environment.
7.According to customer requirements, the heating boiler and remote components is available for cold starting.
Technical Parameters:

Model		SDP 185	SDP 250E	SDP 350E	SDP 350G	SDP 420E	SDP 460G	SDP 560GII	SDP 420H II	SDP 550G	SDP 530G	SDP 600H
Discharge Air Volume(m³/min)		5	7	10	10	12	13	16	12	16	15	17
Discharge Pressure(MPa)		0.7	0.8	0.8	1.3	0.8	1.3	1.3	1.7	1.4	1.3	1.7
Discharge Pipc.Dia		1×1-1/4″			1×3/4″ 1×1-1/2″			1×2″
Discharge Temperature		≤110ºC
Gas Oil Content		≤5PPM
Unit Drive Way		Direct Driven
Diesel Engine Parameters	Model	V2403-T	YC4DK95-H300		WP4.1G140E331		WPG160E331			TAD552VE	WP6G190E330	WP6G240E330
	Power(KW)	33	70		103		118			160	140	176
	Speed(r/min)	2000	2300		2000	2300	2300			1800	2200	2100
	Displacement(L)	2.6	3.621		4.088		4.5			5.1	6.75
Dimension	Overall Length(mm)	3840	3170		3700		3700	3900		4300	4400
	W/O Towber(mm)	2100	2250		2500		2500	2900		3100	3300
	Width(mm)	1490	1600		1960		1960	1900		1900	1900
	Height(mm)	1780	1650		2000		2000	2100		2200	2100
Unit Weight(KG)		1270	1650	2000	2200		2800	2610		2710	2950	3000

Application Fields;
Our Exhibition

what to see in an air compressor

If you need to buy an air compressor, you should know what to look for. The types of air compressors on the market are classified according to their CFM rating, safety devices, and pumps. There are several differences between lubricated and oil-free air compressors that you should know before buying. To better understand the difference between these types of air compressors, read on. This article will guide you through these differences.

Pump

If you are looking for a quality air compressor, you have come to the right place. A good air compressor pump will provide high pressure for anything from tires to boats and more. There are hundreds of different models to choose from, and the great thing about buying 1 from a Chinese manufacturer is that they have so many options. More importantly, Chinese manufacturers can customize air equipment such as air compressors at low prices.
A good quality air pump won’t break easily, but you’ll be able to use it for years. Choosing a high-quality pump will help you avoid many hassles on the road, such as unplanned downtime and installation costs. Plus, a pump from the same manufacturer as your air compressor is your best bet to ensure optimum performance. Listed below are some tips for finding a quality pump for your air compressor.
The air compressor is an important but unremarkable invention. Without them, our lives would be completely different. Without a pump, we can’t get hot water from central heating, nor can we get heat from the refrigerator. We can’t inflate bicycle tires, and we can’t refuel cars. Pumps are vital to all kinds of machines. So why is it important to choose the right product? The answer may surprise you.
Different types of pumps are used for different applications. Positive displacement pumps move a fixed volume of fluid and direct it to a drain. This design ensures constant flow at a constant speed regardless of discharge pressure. Centrifugal pumps work differently. The impeller accelerates the fluid, converting the input energy into kinetic energy. This type of pump is most commonly used in mines, air conditioning, industrial plants, and flood control.
air-compressor

safety equipment

There are several safety features you should check when using an air compressor. First, check the connection of the air filter to the air. If they come loose, parts may separate and cause injury. Another important safety feature is the shut-off valve. When working near compressed air, the shut-off valve should be within easy reach and visibility. Moving parts and other equipment must be protected with protective covers. Check safety valve and replace damaged parts.
Rupture discs are copper discs located on the air cooler. When the air pressure exceeds a certain limit, it bursts. Fusible plugs contain materials that melt at high temperatures. The compressor should have a lubricating oil pressure alarm and cut off the trip signal. If these 2 safety devices fail, the compressor should be stopped immediately. The rupture disc should be inspected at least weekly to ensure it does not rupture under pressure.
If the pressure level is too high, and overcurrent protection device cuts power to the motor. It also automatically shuts off the compressor when the hose ruptures or the air volume exceeds a preset level. The device should be installed on the air compressor to prevent accidents. Its job is to protect the operator from harm. If employees do not follow these safety measures, they may cause equipment damage.
To ensure safety when operating the air compressor, safety glasses and gloves should be worn. Pressurized air can cause eye injury, and crash goggles can provide a barrier to prevent this. Additionally, the self-retracting cord prevents trip hazards and reinforces excess cord. You should also keep your hands and body away from the air nozzle. This will prevent you from being sprayed with compressed air.

CFM Rating

An air compressor’s PSI and CFM ratings indicate the pressure and volume it can deliver. PSI stands for pounds per square inch and measures the force and pressure contained in 1 square inch of air. These 2 indicators are equally important when choosing an air compressor. If you need a lot of compressed air for a specific application, you will need a higher psi compressor. Likewise, if you are using compressed air in a smaller application, a low cfm compressor will not provide enough power to meet your needs.
When comparing different air compressors, be sure to pay close attention to horsepower and CFM ratings. While compressor power is essential for some tasks, it is not the most important aspect. The CFM rating of an air compressor will determine how big a project it can handle and how long it takes to charge. Make sure you understand the CFM and PSI ratings of your future compressors, as not knowing these important statistics can frustrate you and drive up costs.
In general, it is best to choose an air compressor with a CFM rating higher than the size of the air tool. This will ensure that the air compressor has enough pressure to work multiple tools efficiently at the same time. While smaller CFM ratings may be sufficient for smaller projects, larger tools such as drills require a lot of air. Therefore, the higher the CFM, the larger and more powerful the tool.
Once you understand the CFM of an air compressor, you can start looking for the right tool. You can check the CFM rating of your air compressor online by commenting below. If you’re not sure about the size of your air tool, you can always buy a second air compressor. This is a great way to double the CFM of your air compressor! You’ll have more air to do more work, and your compressor will last longer.
air-compressor

Lack of oil and lubrication

Oil-free air compressors have a smaller footprint and require less maintenance than oil-lubricated air compressors. Although oil-lubricated air compressors are more expensive and heavier than oil-free air compressors, they are also ideal for stationary use. The benefits of oil-free air compressors include greater durability and lower maintenance costs. The advantages and disadvantages of each type are discussed below.
Oil-free air compressors are generally quieter than oil-lubricated air compressors. However, you may still experience some noise while using it. To avoid this, you should choose a quiet intake compressor. However, if you work next to a noisy compressor, you should buy a muffler, an aftermarket filter that reduces compressor noise.
If you want to use the air compressor for a long time, the oil-free model is not the right choice. Its Teflon coating wears off over time, especially at extreme temperatures. Additionally, oil-free air compressors have a large number of moving parts that require regular maintenance, while oil-filled air compressors are great for those who don’t want to invest in extra parts.
Another major difference between oil-free and oil-lubricated air compressors is lubrication. Oil-lubricated air compressors require regular lubrication whereas oil-free air compressors are pre-lubricated. They have fewer parts and are cheaper. Oil-free air compressors are lighter than oil-lubricated air compressors. In addition to being more affordable, oil-free air compressors are more powerful and durable.
While oil-filled air compressors are more efficient and durable, they generate a lot of heat. However, they are also more expensive and require regular oil changes. Furthermore, they are difficult to transport. They also need to be permanently installed. These air compressors are also not portable and require a fixed location. So, consider your needs before deciding which type is best for you. When you’re choosing an air compressor for your business, be sure to shop around.
air-compressor

noise level

If you are wondering what the noise level of an air compressor is, the answer depends on your specific equipment and working environment conditions. Typically, air compressors produce 40 to 90 decibels of noise. Although the lower the decibel level, the quieter the compressor will be. Larger, more powerful air compressors produce higher noise levels than their little brothers. But no matter how big the air compressors are, it’s a good idea to wear hearing protection while working around them.
When purchasing a new air compressor, the noise level of the air compressor should be considered. While this may seem like a small problem, there are actually a lot of variations on these noisy machines. The most common type of air compressor is the reciprocating piston pump. This model uses pistons similar to an engine to rotate inside a chamber. The piston moves quickly and traps air proportional to its size. Single-piston air compressors are generally noisier than twin-piston models, also known as twin cylinders.
But even if you have the proper equipment to protect your hearing, it’s still important to know the noise level of an air compressor. Even if the noise is not immediately dangerous, it can still cause temporary or permanent hearing loss. This condition is called noise-induced hearing loss, and an air compressor with a sound level of 80 or higher can cause permanent hearing damage. You can avoid potential damage to your hearing and prevent accidents by simply paying attention to the noise level of your air compressor.
Air compressors are inherently noisy, but if you take steps to reduce their noise levels, you can minimize disruption to neighbors and co-workers. For example, installing a sound enclosure in your work area can prevent your air compressor from making as much noise as before. Depending on your workspace, you can also try installing a long air hose, which will reduce sound levels by up to 25%.
China China Made High Efficiency Industrial Air Compressor for Electric Power Industries

China CZPT Large Displacement Permanent Magnet Frequency 110kw Screw Air Compressor for Large Industrial

Product Description

Rodlars large displacement permanent magnet frequency 110KW screw air
compressor for large industrial

Products Description

Product Parameters of CZPT Permanent Magnet Frequency Screw Air Compressor
Model	Motor Power		Pressure	Capacity	Noise Level	Outlet Pipe Diameter	Net Weight	Dimensions	Lubricating oil capacity
	KW	HP	Bar	m3/min	DB	Inch	Kgs	LWH(mm)	L
LS-10APM	7.5	10	7	1.2	66±2	G ½	130	900640850	10
			8	1.1
			10	0.95
			12	0.8
LS-15APM	11	15	7	1.65	68±2	G ¾	200	10007501571	18
			8	1.5
			10	1.3
			12	1.1
LS-20APM	15	20	7	2.5	68±2	G ¾	210	10007501571	18
			8	2.3
			10	2.1
			12	1.9
LS-25APM	18.5	25	7	3.2	68±2	G1	280	11008501200	18
			8	3
			10	2.7
			12	2.4
LS-30APM	22	30	7	3.8	68±2	G1	300	11008501200	18
			8	3.6
			10	3.2
			12	2.7
LS-40APM	30	40	7	5.3	68±2	G1	340	11008501200	18
			8	5
			10	4.5
			12	4
LS-50APM	37	50	7	6.8	68±2	G1-½	430	125010001345	30
			8	6.2
			10	5.6
			12	5
LS-60APM	45	60	7	7.4	72±2	G1-½	460	125010001345	30
			8	7
			10	6.2
			12	5.6
LS-75APM	55	75	7	10	72±2	G2	820	170012001630	65
			8	9.6
			10	8.5
			12	7.6
LS-100APM	75	100	7	13.4	72±2	G2	950	170012001630	65
			8	12.6
			10	11.2
			12	10
LS-120APM	90	120	7	16.2	72±2	G2	1190	170012001630	75
			8	15
			10	13.8
			12	12.3
LS-150APM	110	150	7	21	75±2	G2-½	1550	230014701840	90
			8	19.8
			10	17.4
			12	14.8
LS-175APM	132	175	7	24.5	75±2	G2-½	1550	230014701840	90
			8	23.2
			10	20.5
			12	17.4
LS-200APM	160	200	7	28.7	75±2	G2-½	2900	230014701840	110
			8	27.6
			10	24.6
			12	21.5
LS-250APM	185	250	7	32	75±2	DN100	3200	360021002190	110
			8	30.4
			10	27.4
			12	24.8
LS-300APM	220	300	7	36	82±2	DN100	4000	360021002190	125
			8	34.3
			10	30.2
			12	27.7
LS-350APM	250	350	7	42	82±2	DN100	4500	360021002190	150
			8	40.5
			10	38.2
			12	34.5
LS-430APM	315	430	7	51	82±2	DN100	6000	360021002190	150
			8	50.2
			10	44.5
			12	39.5
LS-480APM	355	480	7	64	84±2	DN100	6500	360021002190	150
			8	61
			10	56.5
			12	49
LS-540APM	400	540	7	71.2	84±2	DN100	7200	360021002190	180
			8	68.1
			10	62.8
			12	52.2
Remarks:
1.The exhaust volume is measured under the rated exhaust pressure, according to the national standard GB3853 test (equivalent to ISO1217 appendix C).
2.Recommend frequency 30-100%.
3.The above data is based on the standard grid-380V/50HZ.

Non-standard customization service support

Please make further inquiry for the non-standard specification type and machines which
are used under high or low temperature, high humidity,dusty working environment etc.

Details Images

Motor
1.IEC high efficiency drive motor
2.IP54 and high temperature F class rating
Controller
1.Easy to use and maintenance free
2.Constant readout of pressure and temperature
3.Provides 24 hours automatic start-stop operation
Inlet valve
The unique design differential pressure valve provide rapid response under any
condition and maintains the set differential pressure between the inlet pressure
and outlet pressure.100% modulating inlet valve to match system air demand.
Filtration system
Ultra efficient Kerry inlet air filters provide clean air that traps dirt particals to
less than 3 microns.
Electrical control protection
1.Phase protectiom
2.Phase sequence protection relay
3.High discharge temperature shutdown
4.Auto-dual control
5.Overload start protection

Company Profile
Luosi Technology Co., Ltd.,one of Biggest Air Compressor Manufacture with 33 years focus
in air Compressor in China.We are specialized in R&D, manufacturing, sales and service of air
compressors and supporting equipment.With over 20,000 square meters morden workshop,one
whole digital inspection line, 3 air compressor line, all with advanced automatic production equipment.We have air compressor technology research and development, manufacturing,
quality, logistics, operation, marketing, and after-sales service departments.

Our company mainly produces screw air compressor, permanent magnet variable frequency air compressor, two-stage permanent magnet air compressor, special laser cutting air compressor,
high and low pressure air compressor, air post-processing equipment (frozen dryer, adsorption
dryer, QPS precision machine, filter, etc.), gas storage tank and supporting parts.Our company
offers variety of products which can meet your multifarious demands.

We adhere to the management principles of “quality first, customer first and credit-based” since
the establishment of the company and always do our best to satisfy potential needs of our
customers. Our company is sincerely willing to cooperate with enterprises from all over the world
in order to realize a CZPT situation since the trend of economic globalization has developed with anirresistible force.

Certification

FAQ
Q1:Are you a manufactures or trading company?
A1:We are professional manufacture of Screw air compressor of HangZhou
(Close to HangZhou) ,33 years of focus in Air Compressor.

Q2:What’s your Delivery Time?
A2:Generally 10days.If it is an urgently or Non-standard order, please contact us in advance.

Q3:How long is your air compressor warranty?
A3:One year for the whole machine and 2 years for screw air end, except consumable
spare parts.

Q4:How many Screw Air Compressor do you produce everyday?
A4:We can produce 300 pieces everyday.

Q5:Can you use our brand?
A5:Yes, Both OEM & ODM service can be accepted.

Q6:How long could your air compressor be used?
A6:Generally, more than 10 years.

Q7:What’s payment term?
A7:T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept
USD, RMB, Euro and other currency.

Q8:How about the maintenance?
A8:First maintenance need to be done after 500Hours, and then every 2000-3000 hours
to do the normal maintenance, and consider the actual environment.

Q9:How do you control quality ?
A9:1.The raw materials are strictly inspected
2.Each compressor must pass at least 5 hours of continuous testing before leaving
the factory.
Payment and Shipping

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China CZPT Large Displacement Permanent Magnet Frequency 110kw Screw Air Compressor for Large Industrial

China China High Efficiency 7.5-250 Kw Oilless Energy Saving AC Rotary Single Screw Type Air Compressor with CE Used for Industrial

Product Description

ModelZ		SGD Series
Type of Cooling		Air Cooling/Water cooling
Motor Power	kw/hp	7.5~250kw(10~350hp)
Working Pressure	Mpa	0.8~1.2(customizable)
Starting Mode		Y-Δ
Type of Driving		Driect driven
Voltage		380V 220V 440V 415V / 3PH / 50HZ 60HZ Can be customized

Exhaust Oil Volum		<3ppm
Noise	db	68±2
Outlet Air Humidity	ºC	ambient temperature+15ºC

Advantages

-Simple, Compact Design:Sturdy construction with few moving parts, easy to access and maintain ,easy to
replace parts, very reliable and durable.

-Direct Axial Coupling to the Motor:Direct coupling is possible because the high compression ratio permit
slow rotation speeds, eliminating the need for transmission or gears. Fewer parts, mean slower energy
dissipation and simplified maintenance.

-Low Rotation Speeds:Lower speeds reduce vibration, thus diminishing noise and wear, lowering temperature
and eliminating the need for foundations.

-Low Cycle Temperature:Lower temperatures reduce wear,coolant consumption and leakage caused by
distension of parts.Less energy is needed for cooling, and the purity of delivered air is enhanced.

-Low Need for Maintenance:With fewer parts suffering little wear, single-stage rotary units offer cleaner and
more reliable operation, significantly reducing maintenance needs.
Technical Data of Direct Drive Electric Motor Screw Air Compressors

Model	Working Pressure		Capacity		Motor Power	Dimension (mm)	Net Weight (KGS)	Air Outlet Pipe Diameter
Model	Psi	bar	Cfm	m3/min	kw/hp	Dimension (mm)	Net Weight (KGS)	Air Outlet Pipe Diameter
SGD08	102	7	42.4	1.2	7.5/10	900670850	200	1/2”
	116	8	38.8	1.1
	145	10	33.5	0.95
	174	10	28.3	0.8
SGD11	102	7	58.3	1.65	11/15	10807501571	280	3/4”
	116	8	53	1.5
	145	10	45.9	1.3
	174	12	38.8	1.1
SGD15	102	7	88.3	2.5	15/20	10807501571	300	3/4”
	116	8	81.2	2.3
	145	10	74.2	2.1
	174	12	67.1	1.9
SGD18	102	7	113	3.2	18.5/25	13808501185	430	1”
	116	8	105.9	3
	145	10	95.3	2.7
	174	12	84.7	2.4
SGD22	100	7	134.2	3.8	22/30	13808501185	450	1”
	116	8	127.1	3.6
	145	10	113	3.2
	174	12	95.3	2.7
SGD30	102	7	187.1	5.3	30/40	13808501185	500	1”
	116	8	176.6	5
	145	10	158.9	4.5
	174	12	141.2	4
SGD37	102	7	240.1	6.8	37/50	150010001345	650	11/2″
	116	8	218.9	6.2
	145	10	197.7	5.6
	174	12	176.6	5
SGD45	102	7	261.3	7.4	45/60	150010001345	680	11/2″
	116	8	247.2	7
	145	10	218.9	6.2
	174	12	197.7	5.6
SGD55	102	7	353.1	10	55/75	180012501670	1150	2″
	116	8	339	9.6
	145	10	300.1	8.5
	174	12	268.4	7.6
SGD75	102	7	473.2	13.4	75/100	180012501670	1200	2″
	116	8	444.9	12.6
	145	10	395.5	11.2
	174	12	353.1	10
SGD90	102	7	572	16.2	90/120	180012501670	1350	2″
	116	8	529.7	15
	145	10	487.3	13.8
	174	12	434.3	12.3
SGD110	102	7	741.5	21	110/150	230014701840	1800	2 1/2”
	116	8	699.1	19.8
	145	10	614.4	17.4
	174	12	522.6	14.8
SGD132	102	7	865.1	24.5	132/175	230014701840	1850	2 1/2”
	116	8	819.2	23.2
	145	10	723.9	20.5
	174	12	614.4	17.4
SGD160	102	7	1013.4	28.7	160/200	230014701840	2000	2 1/2”
	116	8	974.6	27.6
	145	10	868.6	24.6
	174	12	759.2	21.5
SGD185	102	7	1129.9	32	185/250	315019802152	3500	DN85
	116	8	1073.4	30.4
	145	10	967.5	27.4
	174	12	875.7	24.8
SGD220	102	7	1271.2	36	220/300	315019802152	3800	DN85
	116	8	1211.1	34.3
	145	10	1066.4	30.2
	174	12	978.1	27.7
SGD250	102	7	1483	42	250/350	315019802152	4000	DN85
	116	8	1430.1	40.5
	145	10	1348.8	38.2
	174	12	1218.2	34.5
SGD315	102	7	1800.8	51	315/430	400019802152	6000	DN110
	116	8	1772.6	50.2
	145	10	1571.3	44.5
	174	12	1412.4	40
SGD355	102	7	2259.8	64	355/480	400019802152	6500	DN110
	116	8	2153.9	61
	145	10	1995	56.5
	174	12	1730.2	49
Motor Protection Class: IP23/IP54/IP55 or as per your required
Voltage: 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

FAQ:
Q1: What is the rotor speed for the air end?
A1: 2980rmp.
Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)
Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).
Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.
Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph,
or as per your requests.
Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports
can be provided according to your needs.
Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.
Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.
Q9: Do you have spare parts in stock?
A9: Yes, we do.
Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only 1 motor, they are lightweight, compact, and easy to handle. Using 1 air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal 1 does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has 1 of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, 4 times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing 1 for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has 1 cylinder and 2 valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery 1 controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, 1 piston, and 1 air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage 1 is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting 2 output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure 20 to 40 PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least 40 to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as 50 percent on and 20-5 percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by 1 percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately 4 amps of power. A one-horsepower compressor would draw about 12 amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with 3 electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China China High Efficiency 7.5-250 Kw Oilless Energy Saving AC Rotary Single Screw Type Air Compressor with CE Used for Industrial

China CZPT Industrial Oil Free Air Compressor Low Pressure Comoressor, Portable Air Compressor

Product Description

Automatic PET Botlle Blow Molding Machine With Good Quality

LD-2CAV-2000 full automatic blow molding shaping machine can produce PET containers including
the bottles for kinds of wine, drink, soybean, vinegar, and pesticide (less than 20liters) according to the
different bottle shape and diameter. It has automobile system with high efficiency. The distant infrared
ray heat pipe are used in the machine, It has high pressure protection with the feature of precisely removing
mould, The machine has no noise It is easy to maintain It’s the equipment for producing PET bottles.

LD-2CAV-2000 Automatic Blow Mouldine Machine
1	Mold gathering strength (KN):	60
2	Mold traveling distance (mm):	380
3	Mold hole number (cavity):	4
4	Max. Bottle capacity (L):	1
5	Max. Tooth part size (mm):	28-80
6	Theoretic production capacity (BPH):	500-2500
7	Total power consumption (kW):	0.2
8	Thermal rating (kW):	8-20
9	Operating pressure (kg/cm2):	10
10	Bottle blowing pressure (kg/cm2):	50
11	Blowing Moulding Machine size (m):	2.85 x 1.65 x 1. 75
13	Machine weight (KG):	1790

FAQ

1: Do you have stock machines to ship ?
Yes, we have Semi-automatic standard machines in stock.

2: Do you inspect the finished products?
Yes. Each step of production and finished products will be carried out inspection by QC department before shipment.

3: Can you offer oversea service?

Engineers available to service overseas.

4: How about the guarantee period?

One year whole machine guarantee.

5: What’s the lead time?
15-30 days after received the deposit.

Choose an Air Compressor for Your Business

Positive displacement

Single-stage

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China CZPT Industrial Oil Free Air Compressor Low Pressure Comoressor, Portable Air Compressor

China 2022 Hot Sale Remote Control Industrial Heavy Duty 200-1600 Cfm Portable Mobile Movable Diesel Engine Direct Driven Screw Type Rotary Air Compressor for Mining

Product Description

Mature Factory Similar CZPT Trailer Mounted Portable Movable Diesel Screw Air Compressor 200-1800 cfm For Drilling Machine

High Pressure Movable Screw Air Compressor for Drilling Rig

Mobile Diesel Powered Air Compressor 25 Bar for Well Drilling

Packaging & Shipping

FAQ

Q7: Can you give us your best price?
A7: Yes, of course. And we can offer more stable quality products at a suitable price.

Q8: Please send price list ?
A8: OK, could you please provide us with your way of communication?

Q9: Can you send the real picture of the product?
A9: Yes,of course,you please check the pictures and videos,just let me know how many you need ?

Q10: Would it be convenient to hand out your product manual?
A10: Hello,friend,this is our catalog,and the model SUPC560-25-T is the most hot sell,do you need to more introduction?

Choose an Air Compressor for Your Business

Positive displacement

Single-stage

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China 2022 Hot Sale Remote Control Industrial Heavy Duty 200-1600 Cfm Portable Mobile Movable Diesel Engine Direct Driven Screw Type Rotary Air Compressor for Mining

China Air-Compressors Industrial Machines portable Car Dental Pump 100 Liter 8 Bar Oil Free Oilless Silence Rotary Air Pump Screw Air Compressor with Air Tank

Product Description

Manufacturer low noise power saving 37KW permanent magnet variable frequency screw air compressor 6.8 cubic air compressor screw

.Schematic diagram of the whole set of installation effect:

Rated exhaust pressure	3.0 Mpa
Drive way	Secondary direct connection
cooling method	Air cooling
Outlet temperature	Ambient temperature +25 ºC
Noise	65 dB(A)
Gas supply oil content	≤2 PPM
Dimensions	1650×1150× 1310 L×W×H(mm)
Total weight	868 Kg
Rated working power	3/380/60 PH/V/HZ
Motor protection level	IP54
Insulation class	Class F insulation

The Air Compressor Is a Versatile Tool

The Air Compressor is 1 of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.
air-compressor

Oil-injected

Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.

Oil-free

What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
air-compressor

Gasoline

When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.

Electricity

Electricity in an air compressor is not cheap. A 25 HP air compressor runs for 10 hours each day, 5 days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for 3 hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to 4 thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
air-compressor

Variable frequency drive

The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of 6 to 7 bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is 1 of the best investments in your compressor. So, why wait any longer?

China Air-Compressors Industrial Machines portable Car Dental Pump 100 Liter 8 Bar Oil Free Oilless Silence Rotary Air Pump Screw Air Compressor with Air Tank

China Nx-5.5dg 7HP Screw Compressor Industrial with Air Tank

Product Description

Product Technical Description

Model :	Screw Air Compressor
Type:	VSD Screw Air Compressor
Voltage:	380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
Working Pressure:	7~12.5bar
Installed Motor Power:	3.7~7.5KW
Color:	Blue
Driven Method:	Direct Driven
Air End:	High-efficiency Screw Air End Technology
Trademark:	Xihu (West Lake) Dis.ang
Transport Package:	Standard Wooden Packing
Available Certificate:	CE, ISO
Origin:	ZheJiang , China
Application:	Food,Chemical,Spraying Treatment,Electrics,Medical Treatment,Packing

Product Features

1. high reliability.

2. Oil Free Permanent Magnetic Motor.

3. IP55 protection grade & heavy duty air filter, suitable for high dusty environment.

4. IE4 Efficiency motor efficiency.

5. Most energy saving mode, Only work at loading.

6. Wide frequency range 25%-100%.

7. Premium Magnetic material resist more than 180ºC temp.

8. Direct Taper connection, no transmission power loss, easy maintenance.

9.Touch Screen PLC with preset running schedule, more intelligent control.

10. Main motor is inverter control, more accurate control.

11. Easy for installation and service.

Model		NX-5.5DG
Capacity/Pressure(m3/min,/BAR)		0.63/8	0.52/10	0.38/12
PM Motor	Power(KW)	5.5KW(7HP)
	Speed(r/min)	3000
	Starting way	VSD Startup
	Volt(V)	380/400/415(220)
	Motor safety grade	IP23
	Motor isolation grade	F
Electrical Supply		380(400,415)V/50Hz/3Phase, 220V/60HZ/3P,Customer′s Requirements
Outlet Temperature(ºC)		≤ ambient Temperature+15ºC
Driven way		Direct Driven
Noise level at 1 meter		62±2dB(A)
Cooling method		Air cooling
Oil content		1~3 ppm
Outlet Connection		Rp1/2
Dimension	Length(mm)	1571
	Width(mm)	500
	Height(mm)	1035

FAQ

1.Why customer choose us?
Xihu (West Lake) Dis.ang Air Compressor CO., LTD., with 37 years old history,we are specialized in Rotary Screw Air Compressor.
Germany Standard and 10 years exporting experience help us won more than 50 loyal foreign agents. We warmly welcome your small trial order for quality or market test.
2.Are you a manufacturer or trading company?
We are professional manufacturer with big modern factory in HangZhou,China.
Both OEM & ODM service can be accepted.
3.What’s your delivery time?
Generally 3 to 7 days, if urgently order, pls contact our sales in advance.
4.How long is your air compressor warranty?
One year for the whole machine and 2 years for screw air end, except consumable spare parts.
5.How long could your air compressor be used?
Generally, more than 10 years.
6. What’s payment term?
T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc.
Also we could accept USD, RMB, Euro and other currency.
7.How about your customer service?
24 hours on-line service available. 48hours problem solved promise.
8.How about your after-sales service?
1. Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3. Worldwide agents and after service available.

Contact us

Company Name: ZheJiang Xihu (West Lake) Dis.ang Air Compressor Co., Ltd
Contact Person: Cindy Chen

If you are interested in any of our products,please feel free to contact us.We are looking forward to cooperating,growing and developing with your sincerely.

How to Repair and Maintain an Air Compressor

A compressor is a device used to move air from 1 place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.

Positive displacement

Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are 2 types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the 2 types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
air-compressor

oil free

If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in 1 minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
air-compressor

double acting

A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
air-compressor

fuel tank pressure switch

You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.

energy source

The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require 3 separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require 3 separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.

China Nx-5.5dg 7HP Screw Compressor Industrial with Air Tank

China 22kw 30HP General Industrial Energy- Saving Two Stage Screw Air Compressor for Sale

Product Description

AirHorse Promises Every Machine Will Run Well More Than 15 Years

Features Of Direct Driven Screw Air Compressor

1 . Air end with high-efficiency

2. Double Screw with low noise, Super Silenced Enclosure

3. Elegant compact design. Fully open access door to inner parts for easy service.

4. 100% Continuous duty operation. Load/No Load operation

5. High quality CE Certificate industrial electric motors. ISO,CE,UL Certificate

6. Easy to use and read LCD control panel

7. High temperature, high pressure and anti-rotation shutdown

8. Energy efficient operation

9. 5 micron, water-resistant air filtration material

10. 1year full machine warranty,3years air end warranty.

11. Supply the machine with different working voltage according to customer’s request,
such as: 380Volt,3phase,50hz
420Volt,3phase,50hz
380Volt,3phase,60hz
220Volt,3phase and 60hz, etc.

TCEHNICAL SPECIFICATIONS OF THE DIRECT DRIVEN SCREW AIR COMPRESSOR
Model	AHD-30A	AHD-50A	AHD-75A	AHD-100A	AHD-120A/W	AHD-150A/W	AHD-175A/W	AHD-220A/W	AHD-250A/W	AHD-300A/W	AHD-350A/W
Free air deliver /Discharge pressure (m3/min /Mpa)	3.8/0.7 3.6/0.8 3.2/1.0 2.8/1.2	6.8/0.7 6.2/0.8 5.6/1.0 4.9/1.2	10.0/0.7 9.1/0.8 8.5/1.0 7.6/1.2	13.5/0.7 12.6/0.8 11.2/1.0 10.0/1.2	16.1/0.7 15.0/0.8 13.8/1.0 12.3/1.2	21.0/0.7 19.8/0.8 17.0/1.0 15.3/1.2	25.2/0.7 24.0/0.8 21.0/1.0 18.3/1.2	28.7/0.7 27.6/0.8 24.6/1.0 21.5/1.2	32.0/0.7 30.5/0.8 27.5/1.0 24.8/1.2	36.7/0.7 34.5/0.8 30.2/1.0 27.8/1.2	42.0/0.7 40.5/0.8 38.1/1.0 34.6/1.2
No.of compression stage	single stage
Ambient temperature	‘-5–+45^oC
Cooling model	Air –Cooling					Air-Cooling&Water-Cooling		Water-Cooling
Discharge temperature (0C)	Ambient temperature+15^oC
Lubricant(L)	18	30	65			90		110
Noise level (Db)	68±2		72±2			75±2			72±2
Drive method	Direct drive
Electricity (V/ph/Hz)	380/3/50
Power (KW/HP)	22/30	37/50	55/75	75/100	90/120	110/150	132/175	150/200	185/250	220/300	250/350
Starting method	Y-ΔStarter
Dimension: length/ width/ height (mm)	1400* 900* 1220	1400* 900* 1220	1800* 1200* 1600	1900* 1200* 1600	2100* 1400* 1780	2360* 1360* 1800	2460* 1420* 1800	2560* 1540* 1840	2610* 1640* 2050	2700* 1740* 2100	2900* 1850* 2200
Weight(kg)	680	1060	1880	1980	2100	2900	3500	3900	4200	4600	5000
Air outlet pipe diameter (inch/mm)	1″	1 1/2″	2″			DN65		DN80		DN100

HangZhou AirHorse Compressor Co., Ltd.

HangZhou AirHorse Compressor co., ltd is the professional manufacturing and exporter. We are specialized in air compressor research, development and production. The main products including screw air compressor, piston air compressor and air dryer etc. With the advanced design, high reliability, low noise, long running life time, our products are widely used in power generation, semi conductor, shipping, ship building, oil field, rubber, food, pharmacy, package, electronic, communication, cement, glasses, chemical, textile, papermaking, gas, oil refining etc.

With 30 years’s profound researches and experience in this line, and the join of high-technical from Germany and Italy, We produce the very good quality screw air compressor and our goods were selling more than 100 countries and area. We are famous with ” Superior quality, competitive price and high-grade service”.

We have obtained the approval of ISO9001-2000 international quality management system, ISO14001 Enviroment management system authentication, CE quality system, UL quality system ASME quality system etc.

Packaging and Shipping

Packing Details: Wooden crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package (for stationary screw air compressor)

• Shipping method: by sea, by LCL/FCL or as requested

• Delivery method: FOB, CFR, CIF and EXW etc.

• Delivery time: in 7-15 days after receiving deposit (customized machines not included)
Our Service

Our service:

(1)Pre-sale service:
Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments.
1. Select equipment model.
2. Design and manufacture products according to client’s special requirement;
3. Train technical personnel for clients.

(2)Services during the sale:
1. Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
3.Warranty: One year for the whole machine Genuine spare parts will be provided with best price.
4.Overseas Engineer Service

(3)After-sale services:
Provide considerate services to minimize clients’ worries.
1. Complete After-sales service, professional engineers available to service machinery at home or oversea.
2.24 hours technical support by e-mail.
3.Other essential technological service.

Contact details:
Company name:HangZhou AirHorse Compressor Co., Ltd.
Company address:No.5 industrial park,No.8 Jingbei Road, CZPT Town,Xihu (West Lake) Dis. District,HangZhou China
Website:http://airhorse8888

Screw Compressor Spare Parts

• Significantly increase service life

• Powerful troubleshooting and protection function

Intake valve(HOERBIGER from Austria)

• System automatically adjusts the consumption
volume of gas accordingly

Motor (Jiangtian, Xihu (West Lake) Dis.g,
same quality as CZPT of USA)

• Protection class IP54, insulation class F

• Efficiency 3%-5% higher than similar products

Air end (German technology) GHH

• Higher efficiency and more dependable

Air filter (Germany MANN)

• 99.9% dedusting effect, ensuring
dustproof quality of air compressor

Double screw (Sweden SKF)

• High precision, long service life

Three grade air and oil separator
(Germany MANN)

• Built-in highly efficient air and
oil separator core, ensuring oil
content of compressed air below
3PPM

Oil filter (Germany MANN)

• With efficiency 20% higher than
the average

• Filter accuracy up to 9μm

Special Customized Service

1) Full OEM

• Quantity: at least 5 pcs

• In this plan, we will do all the changes (Color, name plate and logo) as your need, and will not charge extra fee.

2) Half OEM

• Quantity: no limit

• Under this program, we can make the necessary alteration (name plate and logo) but we will charge some extra fee for the name plate, as the name plate factory has the MOQ.

3) Logo OEM

• Quantity: no limit

• Only the logo will be changed to yours, and no extra fee will be charged.

To do a good job,even in the smallest detail, for high quality products by stricty implementing the quality managerment system.

To extablish brand that is synonymous with advanced technology and outstanding quality.

To develop an efficient and effective quality control system to cement the company’s credibility.

Overseas Engineer Service

• We are available to send our engineer for aboard service. Only need you to arrange the accommodation, transportation and translator. Extra cost for each will be discussed based on local price level.

FAQ

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2: Our company is located in AirHorse Industrial Park, Xihu (West Lake) Dis. District, HangZhou, ZheJiang , China

Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: What about product package?
A5: We pack our products strictly with standard seaworthy case.

Q6: What about the voltage of products?
Can they be customized? A6: Yes, of course. The voltage can be customized according to your equirement.

Q7: Which payment term can you accept?
A7: 40% T/T in advanced, 60% T/T against the B/L copy.

Q8: How long will you take to arrange production?
A8: 380V 50HZ we can delivery the goods within 7-15 days. Other electricity or other color we will delivery within 25-30 days.

Q9: Can you accept OEM orders?
A9: Yes, with professional design team, OEM orders are highly welcome.

Q10: Which trade term can you accept?
A10: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

If you are interested in the product, please send your message to us,we will provide you with the best price of quote.

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with 2 pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
air-compressor

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the 2 types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last 9 to 18 months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for 2 to 5 diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with 2 pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose 1 with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China 22kw 30HP General Industrial Energy- Saving Two Stage Screw Air Compressor for Sale

China 37kw 50HP OEM Variable Speed Industrial Screw Air Compressor

Product Description

RISAN Permanent Magnet Variable Frequency Screw Air Compressor:
Compact, complete machine design, easy for installation, operation and maintenance.
High-efficiency, energy-saving three-phase asynchronous motor specifically designed for screw compressors.
The three-phase rare earth permanent magnet synchronous motor is equipped, with more effective energy-saving control, can greatly reduce the operation cost.
The start-up and operation are more stable, enhance system reliability and extend compressor lifespan.
The noise is lower, the vibration is smaller, the operation is more stable, and reduce the cost of maintenance.
High precision airend, low noise and low vibration, it can achieve the smallest leakage area, and improve work efficiency.
Multiple language control panel, easy to operate.

Model:	RK50V
Power:	37KW/50HP
Airend:	Hanbell AC
Inverter:	Zoncn/Jinlong/Veichi/Inovance
Voltage:	380V 415V etc…
Pressure:	0.8Mpa
Air Flow:	6.2m3/min
Outlet pipe diameter:	R1-1/2
Size:	11808801160mm
Weight:	500kg

About us
RISAN Compressor Co., Ltd. is located in HangZhou City, ZHangZhoug Province. We focus
on the production of energy saving and high efficiency screw air compressors, committing to be
a good example of manufacturing high quality compressor.

Our company has 2 senior engineers, 3 R&D engineers, 2 design engineers and more than 200
experienced employee now, with design production capacity of 4000 units per month. We have
numerical control turrent punch press, CNC bending machine, laser cutting machine, automatic
spraying line, semi-automatic welding line, robot welding station, automatic assembly line,
automatic material warehouse, testing machine and other advanced equipment to guarantee
efficient production and excellent quality.

FAQ:

Q1: Are you factory or trade company?

A1: We are factory.

Q2: Where is your factory?

A2: Our factory is located in Xihu (West Lake) Dis. Industrial Area, HangZhou City, ZHangZhoug, China.

Q3: How about the warranty terms of your machine?

A3: One year warranty for the machine and technical will support according to your needs in any time.

Q4: Will you provide some spare parts of the machines?

A4: Yes, of course.

Q5: What about product package?

A5: We will pack the products strictly with standard seaworthy case.

Q6: Can you customized the voltage of products?

A6: Yes, of course. The voltage can be customized according to your requirement.

Q7: Can you provide samples?

A7: Yes, we cam provide samples.

Q8: How long will you take to arrange production?

A8: 380V 50HZ we can delivery the goods within 7-15 days. Customized items we will delivery within 25-30 days.

Q9: Which payment term can you accept?

A9: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc.

Q10: Which trade term can you accept?

A10: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

A Buyer’s Guide to Air Compressor Types

Single-stage air compressors

Rotary vane compressors

Rotary vane compressors with low-noise models

Rotary vane compressors with 2 pistons

China 37kw 50HP OEM Variable Speed Industrial Screw Air Compressor