Tag Archives: oil free air compressor

China Industrial Energy Saving Dry Oil Free Variable Speed Drive VSD Screw Air Compressor

Product Description

Product Description

THE ELEMENT

The compressor element’s efficiency and tightness are ensured by its unique profile design.

The aviation impeller coating assures long-term performance.

Oil tank and speed-increasing gearbox are integrated.

Great efficiency, energy savings, and high reliability are all features of the built-in oil pump.

 

THE AIR END

The compressor air end has a unique profile design that ensures its efficiency and tightness.

The aviation impeller coating assures long-term performance.

The material for the rotor is forged steel, which has high strength and hardness.

Cooling jackets are used on all series of air ends.

Reusable seal made of high-quality metal.

THE ROTOR

Cooling sleeves guarantee that rotor clearance is kept to a bare small at all times.

Boost efficiency and dependability.

A high-efficiency shaft seal decreases wear and eliminate the possibility of oil leakage.

THE COOLER

High heat exchange efficiency, thanks to an integrated water flow design.

Switching is simple with the heat recovery module.

Flow channel built-in, easy to use, and dependable.

THE AIR FILTER

A high-quality intake filter ensures a high level of filtering.

High energy efficiency and process reliability.

Long service life and intervals between maintenance.

 

THE INTELLIGENT CONTROLLER

The sophisticated control system allows for simultaneous compressor and after-treatment control.

No maintenance is necessary because the hardware and software are designed to be reliable. Multiple local and remote communication options are supported. A thorough examination of the unit’s operational status and historical data.
 

Certifications

Product Parameters

Model Maximum Working Pressure Capacity(FAD)* Installed Motor Power Cooling Method Noise Level Air Outlet Pipe
Diameter		 Dimension Weight
50hz
bar(g) psig m3/min cfm kw hp dB(A) L W H kg
RF37-7VSD A(W) 7 102 3.0-6.5 105.9-229.5 37 50 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling 63 DN80 2180 1450 2200 1950
RF37-8VSD A(W) 8 116 2.8–6.4 98.8-226 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling 63 DN80 2180 1450 2200 1950
RF37-10VSD A(W) 10 145 2.6-6.3 91.8-222.4 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling 63 DN80 2180 1450 2200 1950
RF45-7VSD A(W) 7 102 4.5-7.7 158.9-271.8 45 60 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF45-8VSD A(W) 8 116 4.0-6.5 141.2-229.5 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF45-10VSD A(W) 10 145 3.5-6.8 123.6-240.1 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-7VSD A(W) 7 102 5.0-9.6 176.5-339 55 75 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-8VSD A(W) 8 116 4.5-8.8 158.9-310.7 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-10VSD A(W) 10 145 3.5-7.7 123.6-271.9 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-7VSD A(W) 7 102 5.5-13.5 194.2-476.7 75 100 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-8VSD A(W) 8 116 4.5-13.3 158.9-469.6 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-10VSD A(W) 10 145 4.4-12.1 155.3-427.3 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF90-7VSD A(W) 7 102 5.2-16.2 183.6-572 90 120 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2200
RF90-8VSD A(W) 8 116 4.5-15.6 158.9-550.9 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2200
RF90-10VSD A(W) 10 145 4.4-14.2 155.3-501.4 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2200
RF110-7VSD A(W) 7 102 10.2-19.5 360.2-688.6 110 150 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2700
RF110-8VSD A(W) 8 116 9.3-19.2 328.4-678 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2700
RF110-10VSD A(W) 10 145 8.5-17.5 300.1-618 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2700
RF132-7VSD A(W) 7 102 10.8-23.5 381.3-829.8 132 175 Air Cooling 70 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2800
RF132-8VSD A(W) 8 116 10.4-22.8 367.2-805.1 Air Cooling 70 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2800
RF132-10VSD A(W) 10 145 9.9-20.5 349.6-723.9 Air Cooling 70 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2800
RF145-7VSD A(W) 7 102 11.2-23.9 395.5-844 145 195 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF145-8VSD A(W) 8 116 10.2-22.1 360.2-780.4 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF145-10VSD A(W) 10 145 9.8-20.5 346.0-723.9 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF160-7VSD A(W) 7 102 12.1-28.5 427.3-1006.4 160 215 Air Cooling 74 DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF160-8VSD A(W) 8 116 11.6-26.4 409.6-932.3 Air Cooling 74 DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF160-10VSD A(W) 10 145 9.9-24.5 349.6-865.2 Air Cooling 74 DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF200-7VSD A(W) 7 102 16.5-36.1 582.6-1274.8 200 270 Air Cooling 76 DN80 5040 1650 2100 5600
Water Cooling 65 DN80 3100 1650 2000 4200
RF200-8VSD A(W) 8 116 15.4-33.9 543.8-1197.1 Air Cooling 76 DN80 5040 1650 2100 5600
Water Cooling 65 DN80 3100 1650 2000 4200
RF200-10VSD A(W) 10 145 15.0-30.8 529.7-1087.6 Air Cooling 76 DN80 5040 1650 2100 5600
Water Cooling 67 DN80 3100 1650 2000 4200
RF250-7VSD A(W) 7 102 21.1-45.2 745.1-1596.2 250 350 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 74 DN80 3100 1650 2000 4300
RF250-8VSD A(W) 8 116 19.2-43.4 678.0-1532.6 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 74 DN80 3100 1650 2000 4300
RF250-10VSD A(W) 10 145 18.5-38.8 653.3-1370.2 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 74 DN80 3100 1650 2000 4300
RF275-7VSD A(W) 7 102 22.2-46.8 783.9-1652.7 275 370 Air Cooling 76 DN80 5040 1650 2100 5900
Water Cooling 74 DN80 3100 1650 2000 4400
RF275-8VSD A(W) 8 116 21.3-43.5 752.2-1536.1 Air Cooling 76 DN80 5040 1650 2100 5900
Water Cooling 74 DN80 3100 1650 2000 4400
RF275-10VSD A(W) 10 145 20.1-41.5 709.8-1465.5 Air Cooling 76 DN80 5040 1650 2100 5900
Water Cooling 74 DN80 3100 1650 2000 4400
RF315-7VSD A(W) 7 102 25.0-53.0 882.8-1871.6 315 420 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 65 DN80 3100 1650 2000 4400
RF315-8VSD A(W) 8 116 24.0-51.5 847.5-1818.7 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 65 DN80 3100 1650 2000 4400
RF315-10VSD A(W) 10 145 23.0-49.5 812.2-1748 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 65 DN80 3100 1650 2000 4400

Detailed Photos

How to Repair and Maintain an Air Compressor

A compressor is a device used to move air from 1 place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.

Positive displacement

Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are 2 types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the 2 types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
air-compressor

oil free

If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in 1 minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
air-compressor

double acting

A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
air-compressor

fuel tank pressure switch

You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.

energy source

The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require 3 separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require 3 separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.

China Industrial Energy Saving Dry Oil Free Variable Speed Drive VSD Screw Air Compressor China Industrial Energy Saving Dry Oil Free Variable Speed Drive VSD Screw Air Compressor

China Silent Electric Water Lubrication Rotary Medical Oil Free Screw Air Compressor for Oxygen Generator

Product Description

Model :  Oil Free Series
Type:  Oil Free Screw Air Compressor
Working Pressure:  8~12.5bar
Installed Motor Power:  7.5~250 Kw
Capacity: 0.81~39.30 m3/min
Driven Method: Direct Driven
Power 380V / 3PH / 50HZ / 60HZ
220V / 3PH / 50HZ / 60HZ
440V / 3PH / 50HZ / 60HZ
415V / 3PH / 50HZ / 60HZ
Can be customized
Transport Package: Standard Wooden Packing
Motor protection grade IP54
Insulation class F
Outlet Air Humidity  ambient temperature+10ºC

Product Features
        In pharmaceutical, electronic, chemical, microbial fermentation, blow moulding, pressure detection and other industrial production, there are many medium-pressure compressed air to be used to 1.6-4.0 MPa in power plants, naval ships, national defense facilities. At present, piston air compressors are mostly used at home and abroad, while piston air compressors are characterized by large vibration, high noise, large leakage and short service life, so their efficiency is very low and the same work is done. The medium pressure oil-free screw machine has compact structure, high working efficiency, low noise, low vibration, easy maintenance, low operating cost and good air quality. At the same time, the series of machines are controlled by micro-computer system. The whole machine has multiple protective performance of pressure, temperature and overload energy.
1.Constant pressure control: high-precision constant pressure control with a pressure fluctuation range within0.01MPa.
2. Variable frequency soft start: remove CZPT current during starting, avoid the power grid impact, prevent the current impact through gradual speed regulation and improve flexibility; 
3.No idling: prevent idling of the compressor during running and reduce invalid energy consumption;
3.High performance vector control: low-frequency starting provides a large torque and a low running current, ensuring to get a reasonable torque to drive the air compressor to run stably with the minimum temperature rise of the motor within a wide speed range;

Model Working Pressure Capacity Motor Power Noise
dB(A)		 Inlet and
outlet pipe
diameter of
cooling water		 Cooling
water
volume		 Dimension(mm) Net Weight Air Outlet Pipe Diameter
Psi bar Cfm m3/min kw/hp Water
temp.32ºC		 L W H KGS
T/H
SGM08 116 8 40.65 1.15 7.5/10 58 3/4″ 2 1550 775 1445 630 3/4″
145 10 36.01 1.02
SGM11 116 8 54.73 1.55 11/15 58 3/4″ 2.5 1080 750 1571 280 3/4″
145 10 46.61 1.32
174 12 36.02 1.02
SGM15 116 8 84.74 2.40 15/20 63 1″ 3.5 1080 750 1571 300 1″
145 10 74.86 2.12
174 12 56.85 1.61
SGM18 116 8 109.46 3.10 18.5/25 65 1″ 4 1380 850 1185 430 1″
145 10 92.51 2.62
174 12 75.21 2.13
SGM22 116 8 123.59 3.50 22/30 65 1″ 5 1380 850 1185 450 1″
145 10 110.52 3.13
174 12 92.16 2.61
SGM30 116 8 176.55 5.00 30/40 66 1 1/4″ 7 1380 850 1185 500 1 1/2″
145 10 148.30 4.20
174 12 112.29 3.18
SGM37 116 8 215.39 6.10 37/50 67 1 1/4″ 9 1500 1000 1345 650 1 1/2″
145 10 184.32 5.22
174 12 169.84 4.81
SGM45 116 8 257.76 7.30 45/60 68 1 1/2″ 10 1500 1000 1345 680 2″
145 10 216.45 6.13
174 12 199.50 5.65
SGM55 116 8 338.98 9.60 55/75 70 1 1/2″ 12 1800 1250 1670 1150 2″
145 10 303.67 8.60
174 12 262.00 7.42
SGM75 116 8 441.38 12.50 75/100 73 1 1/2″ 18 1800 1250 1670 1200 2″
145 10 403.24 11.42
174 12 347.10 9.83
SGM90 116 8 575.55 16.30 90/120 73 2″ 20 1800 1250 1670 1350 2 1/2”
145 10 512.70 14.52
174 12 434.31 12.30
SGM110 116 8 685.01 19.40 110/150 78 2″ 24 2300 1470 1840 1800 2 1/2”
145 10 596.74 16.90
174 12 533.18 15.10
SGM132 116 8 784.24 22.21 132/175 78 2″ 30 2300 1470 1840 1850 2 1/2”
145 10 719.62 20.38
174 12 645.82 18.29
SGM160 116 8 1018.69 28.85 160/200 78 2  1/2″ 35 2300 1470 1840 2000 3″
145 10 865.80 24.52
174 12 782.82 22.17
SGM200 116 8 1293.41 36.63 200/270 78 3″ 43 3150 1980 2152 3500 4″
145 10 1154.64 32.70
174 12 978.79 27.72
SGM250 116 8 1514.09 42.88 250/350 78 3″ 53 3150 1980 2152 3800 4
145 10 1377.09 39.00
174 12 1223.14 34.64
SGM320 116 8 2086.82 59.10 320/430 80 4″ 60 3150 1980 2152 4000 5″
145 10 1889.09 53.50
174 12 1703.71 48.25
Motor Protection Class: IP23/IP54/IP55 or as per your required
Voltage: 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q1: What is the rotor speed for the air end?
A1: 2980rmp.

Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)

Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).

Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.

Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.

If you are interested in any of our products,please feel free to contact us.
We are looking forward to cooperating,growing and developing with your sincerely.

 

Types of Air Compressors

There are many types of Air Compressors available on the market. Learn which 1 is right for your needs and what makes 1 better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which 1 you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.
air-compressor

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in 1 stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use 1 of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
air-compressor

Single-stage models

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use 2 stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, 1 piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the 2 pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

Low-noise models

Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These 2 features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
air-compressor

Oil-free models

A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated 1 include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China Silent Electric Water Lubrication Rotary Medical Oil Free Screw Air Compressor for Oxygen Generator China Silent Electric Water Lubrication Rotary Medical Oil Free Screw Air Compressor for Oxygen Generator

China Air Compressor Oil Free 3300341 3 Gallon/12 Liters Quiet Power Technology Briggs & Stratton

Product Description

Enjoy Quiet interior work with the new 3 Gallon/12Liters air compressor featuring, Quiet Power Technology. Briggs & Stratton QPT Air compressors are designed to run 80% Quieter and have 3x longer lifetime than standard air compressors. The high performance induction motor makes this the perfect tool for finish work and inflation jobs. Hear the difference with Briggs & Stratton Quiet Power Technology.Briggs & Stratton Quiet Power Technology air compressors have been tested to be 80% quieter and qualified to 3 times longer motor life than Briggs & Stratton air compressors with standard induction motors.

Technical Specification

Tank Size  3 Gallon /12Liters 
Tank shape  Vertical / Hotdog / Pancake / Twin stack / Parallel / Detachable / Abnormal Hotdog
ASME tank (Y/N) N 
Running HP 3/4 HP (running)
Cut-in/Cut-off (PSI) rated 95PSI-125PSI
CFM@40psi 2.8
CFM@90psi 1.8
 Motor type Induction
Oil free/lubricate Oil-free
Pressure gauge 2×2” 
Cord length 6’/1.8m
Wheels N/A
Air filter steel
Drain valve 1 ball valve
Life cycle(Hrs) 1000h
Duty cycle % 50%
Noise level dB(A) 2m <62

 

Features
  • 80% Quieter than standard Briggs & Stratton Air Comprssors
  • 3x Longer Life than standard Briggs & Stratton Air Compressors .
  • Perfect for in-home projects
Specifications 
  • Tank size : 3 gallon/12liters
  • Max PSI : 125
  • CFM @ 40 PSI : 2.4
  • CFM @ 90 PSI :1.8
  • Horsepower : 0.75
  • Tank Style : Roll Cage
  • Pump : Oil free
  • Motor : QPT
  • Product dimension(L x W x H):19×17.7×13.1inch/485X450X332mm
  • Product weight:    51lbs /20kgs
Accessories
  • 6379-00, 6390-00   
Packaging Info
  • Package dimensions (L x W x H): 20×18.4×14 inch/500X466X355mm
  • Package weight :  56lbss/25.4kg

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only 1 motor, they are lightweight, compact, and easy to handle. Using 1 air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal 1 does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has 1 of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, 4 times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing 1 for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has 1 cylinder and 2 valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery 1 controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, 1 piston, and 1 air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage 1 is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting 2 output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure 20 to 40 PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least 40 to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as 50 percent on and 20-5 percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by 1 percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately 4 amps of power. A one-horsepower compressor would draw about 12 amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with 3 electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China Air Compressor Oil Free 3300341 3 Gallon/12 Liters Quiet Power Technology Briggs & Stratton China Air Compressor Oil Free 3300341 3 Gallon/12 Liters Quiet Power Technology Briggs & Stratton

China High Reliability Low Noise AC Power Cost Saving Singel Screw Oil Free Water Lubricated Rotary Screw Type Air Compressor

Product Description

Product Description

Single screw compressor has a balance of force, the vibration is small. Water to replace oil, to achieve lubrication, cooling, sealing noise, to provide qualified oil-free air, discharge of water without special treatment, in line with environmental protection requirements.
It is extensively used in conjunction with an oxygen generator and has a single screw with a set speed and a capacity ranging from 1 to 43 m3/min.
The symmetry of the structure and the potential of a return hole are set so that the radial and axial force of the single screw compressor can be entirely balanced, resulting in a design life of up to 300,000 hours.
 

Certifications

Product Parameters

Model Maximum Working Pressure Capacity(FAD)* Installed Motor Power Cooling Method Noise Level Air Outlet Pipe
Diameter		 Dimension Weight
50hz
bar(g) psig m3/min cfm kw hp dB(A) L W H kg
RD7.5A 7 101 1.2 42 7.5 10 Air Cooling 61 G1” 1135 800 1000 480
8 116 1.1 39
10 145 1 35
RD11A 7 101 1.6 57 11 15 Air Cooling 61 G1” 1135 800 1000 500
8 116 1.5 53
10 145 1.3 46
RD15A 7 101 2.4 85 15 20 Air Cooling 61 G1” 1400 1000 1200 520
8 116 2.3 81
10 145 2 71
RD18.5A 7 101 3.1 109 18.5 25 Air Cooling 61 G1” 1400 1000 1200 520
8 116 2.8 99
10 145 2.5 88
RD22A 7 101 3.7 131 22 30 Air Cooling 61 G1” 1400 1000 1200 560
8 116 3.4 120
10 145 3 106
RD30A 7 101 5.2 184 30 40 Air Cooling 64 G1.5” 1920 1170 1320 1050
8 116 4.7 166
10 145 4.3 152
RD37A 7 101 6.1 215 37 50 Air Cooling 66 G1.5” 1920 1170 1320 1050
8 116 5.6 198
10 145 5 177
RD45A 7 101 7.5 265 45 60 Air Cooling 66 G2” 1920 1170 1320 1610
8 116 6.8 240
10 145 6 212
RD55W 7 101 10 353 55 74 Air Cooling 66 DN50 1930 1320 1535 1610
8 116 9 318
10 145 7.8 275
RD75W 7 101 13 459 75 100 Air Cooling 70 DN50 1930 1320 1535 1880
8 116 12 424
10 145 10 353
RD90W 7 101 15.5 547 90 120 Air Cooling 70 DN80 1930 1320 1535 2000
8 116 14 494
10 145 12.5 441
RD110W 7 101 20 706 110 147 Air Cooling 70 DN80 2150 1600 1680 3100
8 116 18 636
10 145 16 565
RD132W 7 101 25 883 132 177 Air Cooling 70 DN80 2150 1600 1680 3250
8 116 23 812
10 145 20 706
RD160W 7 101 27 954 160 215 Air Cooling 74 DN100 2150 1600 1680 3200
8 116 25.5 901
10 145 24 848
RD185W 7 101 30 1059 185 248 Air Cooling 74 DN100 2860 1500 1750 4500
8 116 28 989
10 145 25 883
RD200W 7 101 36 1271 200 268 Air Cooling 74 DN100 2860 1500 1750 4500
8 116 33 1165
10 145 27 954
RD250W 7 101 43 1519 250 335 Air Cooling 74 DN100 4150 1500 1800 5200
8 116 41 1448
10 145 38 1342

Detailed Photos

 

The Air Compressor Is a Versatile Tool

The Air Compressor is 1 of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.
air-compressor

Oil-injected

Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.

Oil-free

What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
air-compressor

Gasoline

When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.

Electricity

Electricity in an air compressor is not cheap. A 25 HP air compressor runs for 10 hours each day, 5 days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for 3 hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to 4 thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
air-compressor

Variable frequency drive

The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of 6 to 7 bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is 1 of the best investments in your compressor. So, why wait any longer?

China High Reliability Low Noise AC Power Cost Saving Singel Screw Oil Free Water Lubricated Rotary Screw Type Air Compressor China High Reliability Low Noise AC Power Cost Saving Singel Screw Oil Free Water Lubricated Rotary Screw Type Air Compressor

China Industrial Stationary Similar CZPT Clean Silent 7-10bar Medical Oil Free Direct Driven AC Power Rotary Screw Air Compressor with GHH air end

Product Description

Industrial Silent/Mute Medical Dry Oil Free Oilless Direct Drive Rotary Double Screw Type Air Compressor Advantages

1.Clean air 1, China
Our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome

How to Repair and Maintain an Air Compressor

A compressor is a device used to move air from 1 place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.

Positive displacement

Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are 2 types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the 2 types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
air-compressor

oil free

If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in 1 minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
air-compressor

double acting

A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
air-compressor

fuel tank pressure switch

You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.

energy source

The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require 3 separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require 3 separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.

China Industrial Stationary Similar CZPT Clean Silent 7-10bar Medical Oil Free Direct Driven AC Power Rotary Screw Air Compressor with GHH air end China Industrial Stationary Similar CZPT Clean Silent 7-10bar Medical Oil Free Direct Driven AC Power Rotary Screw Air Compressor with GHH air end

China 15-400 Kw Industrial Silent/Mute Medical Dry Oil Free Air Compressor Oilless Direct Drive Screw Air Compressor

Product Description

Product Name: Made in China ISO9001 Certificate
15kw 2.3 m3/min 82cfm screw air compressor 
Model number: MCS-15
Maximum Pressure:12BAR/174PSI
Working Pressure: 7-12 bar (102 – 174psi) 
Air Delivery/capacity: 1.9-2.5 m3/min 
Motor Power: 15kw/20hp 
Noise Level: 70 dBA
Type of Driving: Direct Driven 
Type of Cooling: Air Cooling/Water Cooling 
Dimension: 950 x 800 x 1160 mm
Weight: 400kg 
Output pipe Diameter: 1″

  

Parameter
 

MODEL MAXIMUM WORKING PRESSURE FREE AIR DELIVERY* OF UNIT AT WORKING PRESSURE MOTOR NOISE LEVEL AIR OUTLET DISCHARGE SIZE WEIGHT DIMENSIONS
Bar PSI l/s m3/min CFM kW HP dBA   KG L X W X H
(mm)
MCS-5.5 7 102 14 0.85 30 5.5 7.5 65±2 G3/4 240 800 x 720 x
950
8 116 13 0.78 28
10 145 11 0.65 23
12 174 9 0.55 20
MCS-7.5 7 102 20 1.2 43 7.5 10 65±2 G3/4 250 800 x 720 x
950
8 116 18 1.1 39
10 145 15 0.9 32
12 174 13 0.75 27
MCS-11 7 102 28 1.65 59 11 15 70±2 G3/4 350 950 x 800 x
1160
8 116 25 1.5 54
10 145 22 1.3 46
12 174 18 1.1 39
MCS-15 7 102 42 2.5 89 15 20 70±2 G3/4 400 950 x 800 x
1160
8 116 38 2.3 82
10 145 35 2.1 75
12 174 32 1.9 68
MCS-18.5 7 102 53 3.2 114 18.5 25 72±2 G1 550 1150 x 900 x
1380
8 116 50 3 107
10 145 45 2.7 96
12 174 40 2.4 86
MCS-22 7 102 63 3.8 136 22 30 73±2 G1 600 1150 x 900 x
1380
8 116 60 3.6 129
10 145 53 3.2 114
12 174 45 2.7 96
MCS-30 7 102 88 5.3 189 30 40 74±2 G1 650 1150 x 900 x
1380
8 116 83 5 179
10 145 75 4.5 161
12 174 67 4 143
MCS-37 7 102 113 6.8 243 37 50 74±2 G1 1/2 800 1320 x 1000 x
1500
8 116 103 6.2 221
10 145 93 5.6 200
12 174 83 5 179
MCS-45 7 102 123 7.4 264 45 60 74±2 G1 1/2 900 1320 x 1000 x
1500
8 116 117 7 250
10 145 103 6.2 221
12 174 93 5.6 200
MCS-55 7 102 167 10 357 55 75 75±2 G2 1300 1600 x 1150 x
1460
8 116 153 9.2 329
10 145 142 8.5 304
12 174 127 7.6 271
MCS-75 7 102 223 13.4 479 75 100 75±2 G2 1500 1800 x 1250 x
1670
8 116 210 12.6 450
10 145 187 11.2 400
12 174 167 10 357
MCS-90 7 102 268 16.1 575 90 120 75±2 G2 1700 1800 x 1250 x
1670
8 116 250 15 536
10 145 230 13.8 493
12 174 210 12.6 450

advantages

1. Easy for Maintenance, Low cost for Maintenance

All the pipe and spare parts is standardized, they can be changed fast.

2. 6000sets capacity for each month.

As 1 of the largest Air compressor Manufacture, with Advanced Automatic Production Line, 6000set air compressor can be produced for each month. The production cost is greatly reduced by the production scale production. Providing the most cost-effective product for you.

3. Rich experience in compressed air system solution, 1 stop service and provide air compressor system design

We can provide one- stop solution. We can not only provide the air compressor, but also high quality air treatment equipment, such as air tank, air dryer, air filter, air pipe, valves and air compressor spare parts. Save your time and cost greatly.

4. Strong R&D Capability

Annual Increasing R&D investment. Introduce German GU technology and the Japanese Military technology.

Long- term collaborative project with HangZhou Jiaotong University.

Application

Sales Service

 Professional online consultant to solve your question about compressor system.

√ Free site design consultant, and energy saving solution to help you save operation cost.

√ Negotiable technician available to service machinery overseas.

√ Online professional after-service until solve the problem.

√ 1 year warranty after commissioning or 16 months against shipping date, it depends on which 1 come firstly for the whole
machine(except maintenance consumable).

√ A sufficient number of spare parts are available, make sure the good after service.

Certificate

About mikovs
 

Mikovs Compressor      

  • Founded in 2011
  • Main product: air compressors, air dryers and air filters
  • Professional R&D team, accept customization order
  • Strong quality control team, quality is strictly controlled
  

RFQ

Q1. Are you trading company or manufacture ?

A: We are professional manufacture of screw air compressor more than 8 years.

 

Q2. How long is the delivery time ?

A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

 

Q3. What’s payment term ?

A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

  

Q4. How about your after-sales service ?

A: 1.Provide customers with installation and commissioning online instructions.

2. Well-trained engineers available to overseas service.

3.Worldwid agents and after service avaiable.arrange our engineers to help you training and installation.

 

Q5. How about your warranty?

 A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

 

 Q6. Do you have any certificate ?

 A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

 

Q7. What about the maintenance ?

 A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance,
and consider the actual environment.

 

Q8. How do you control quality ?

A: 1.Raw- material in checking.

  2.Assembly.

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China 15-400 Kw Industrial Silent/Mute Medical Dry Oil Free Air Compressor Oilless Direct Drive Screw Air Compressor China 15-400 Kw Industrial Silent/Mute Medical Dry Oil Free Air Compressor Oilless Direct Drive Screw Air Compressor

China (SCR75G Series) Hot Sale Oil Free Screw Air Compressor German Technology Direct Driven 7bar to 12.5bar Rotary Industrial High Performance

Product Description

If you are interested in any of our products,please feel free to contact us.
We are looking forward to cooperating,growing and developing with your sincerely

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China (SCR75G Series) Hot Sale Oil Free Screw Air Compressor German Technology Direct Driven 7bar to 12.5bar Rotary Industrial High Performance China (SCR75G Series) Hot Sale Oil Free Screw Air Compressor German Technology Direct Driven 7bar to 12.5bar Rotary Industrial High Performance

China Air Compressor Oil Free 3321751 4.5-Gallon/17 Liters Quiet Briggs & Stratton

Product Description

Enjoy Quiet interior work with the new 4.5 gallon/17 Liters air compressor featuring, Quiet Power Technology. Briggs & Stratton QPT Air compressors are designed to run 80% Quieter and have 3x longer lifetime than standard air compressors. The high performance induction motor makes this the perfect tool for finish work and inflation jobs. Hear the difference with Briggs & Stratton Quiet Power Technology. Includes a 1-year warranty. Extended warranty available. Briggs & Stratton Quiet Power Technology air compressors have been tested to be 80% quieter and qualified to 3 times longer motor life than Briggs & Stratton air compressors with standard induction motors.

Technical Specification

Tank Size  4.5Gallon/17 Liters
Tank shape  Vertical / Hotdog / Pancake / Twin stack / Parallel / Detachable / Abnormal Twinstack
ASME tank (Y/N) N 
Cut-in/Cut-off (PSI) rated 95PSI-125PSI
CFM@90psi 2.0
 Motor type Induction
Oil free/lubricate Oil-free
Pressure gauge 2×2” 
Cord length 6’/1.8m
Wheels N/A
Air filter steel
Life cycle(Hrs) 1000h
Duty cycle % 50%
Noise level dB(A) 2m <60

 

Features
  • 80% Quieter than standard Briggs & Stratton Air Comprssors
  • 3x Longer Life than standard Briggs & Stratton Air Compressors .
  • Perfect for in-home projects
Specifications 
  • Tank size : 4.5 gallon /17 liters
  • Max PSI : 125
  • CFM @ 90 PSI :2.0
  • Tank Style : Twinstack
  • Pump : Oil free
  • Motor : QPT 
Packaging Information
  • Package dimensions (L x W x H): 20.3 x 17x 22.8inch /515x435x580mm

The Air Compressor Is a Versatile Tool

The Air Compressor is 1 of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.
air-compressor

Oil-injected

Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.

Oil-free

What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
air-compressor

Gasoline

When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.

Electricity

Electricity in an air compressor is not cheap. A 25 HP air compressor runs for 10 hours each day, 5 days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for 3 hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to 4 thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
air-compressor

Variable frequency drive

The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of 6 to 7 bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is 1 of the best investments in your compressor. So, why wait any longer?

China Air Compressor Oil Free 3321751 4.5-Gallon/17 Liters Quiet Briggs & Stratton China Air Compressor Oil Free 3321751 4.5-Gallon/17 Liters Quiet Briggs & Stratton

China CZPT Oil Lubricated Inject Rota Hot Sale Oil Free Screw Permanent Magnet VSD Oil Free CZPT Fixed Speed Direct Drive Screw Air Compressor

Product Description

Product Description

Product Technical Description

Model :   Energy Saving Series (EPM)
Type:  Oil Injected Permanent Magnetic Screw Compressor
Voltage:  380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
Working Pressure:  7~13bar
Installed Motor Power:  15~110 Kw
Color:  Blue
Driven Method: Taper Connection Direct Driven
Air End:  Original Ally-win Air End from Germany.
Trademark:  SCR
Transport Package:  Standard Wooden Packing
Available Certificate:  CE, ISO, UL, ASME, GHOST
Origin:  ZheJiang , China
application:  Casting,Metal,Plastic,Rubber

Product Features

1. China-Japan latest technology cooperation, high reliability.

2. Oil Cooling  Permanent Magnetic Motor.

3. IP65 protection grade & heavy duty air filter, suitable for high dusty environment. 

4. IE4 Efficiency motor efficiency.

5.Max.RPM 1500,low noise,high efficiency,better life-span.

6. Most energy saving mode, Only work at loading.

7. Wide frequency range 30%-100%.

8. Premium Magnetic material resist more than 180ºC temp.

9. Reliable PM motor supplier from Italy.

10. Direct Taper connection, no transmission power loss, easy maintenance.

11.Touch Screen PLC with preset running schedule, more intelligent control.

12. Precise VSD technology control.

13. Easy for installation and service.

14. Fantastic Energy Saving, save up to more than 30-40%.

Specially designed PM motor:

The PM motor efficiency is even higher than IE3 premium efficiency motors. The motor uses high performance magnetic materials giving many advantages such as bearing free operation, grease free maintenance, direct 1:1 coupling without transmission losses, low noise and low vibration leading to a compact structure.

Enhanced Energy Savings:

When demand is low the PM low pressure compressor firstly reduces the speed to maintain the correct flow demand. If the air demand stops the compressor enters standby mode, saving further energy. The compressor automatically restarts and runs when the pressure drops below its setpoint.

The latest generation intelligent touchscreen controller:

SCR’s latest touchscreen interface allows simple intelligent control for your compressor. Pressure and scheduling times can be easily programmed allowing you to automatically start and stop the compressor to match production times. Remote operation and real time monitoring are built in the controller as standard.

Model SCR90EPM-7 SCR90EPM-8 SCR90EPM-10
Capacity/Pressure(m3/min,/BAR) 12.7/7 12.5/8 12.3/10
PM Motor Power(KW) 63KW(90H.P)
Speed(r/min) 1500
Starting way VSD Startup
Volt(V) 380/400/415(220)
Motor safety grade IP54
Motor isolation grade F
Electrical Supply 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P
Outlet Temperature(ºC) ≤ Environment Temperature+10ºC
Driven way Direct Driven
Noise level at 1 meter 76±3dB(A)
Cooling method Air cooling
Oil content 1~3 ppm
Outlet Connection Rc 2
Dimension Length(mm) 2300
Width(mm) 1350
Height(mm) 1500
Weight(KG) 1800

Product Categories

Advantages

Application

About SCR

FAQ

1 What trade terms do we provide? What kind of settlement currency do we offer?
Trade term :CIF ,CFR ,FOB,Ex-Works As far Our business traded in Dollars ,Euros and RMB .

2 How long is our delivery?
Our standard delivery time is 30-40 days after confirmation order & receiving recipets for standard compressors, for the other non standard requirement will be discussed case by case.

3 What is the voltage of the compressor?
The available voltage include 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the same time we provide other voltage according to customer requirement.

4 Can our compressor run in high temperature environment? What is the working temperature range for our machine?
Yes ,our machine would run in high temperature environment ,until now our products have been sold to many countries which wouldmeet high temperature in summer ,such like Iraq, Saudi Arabia, Egypt, Algeria, etc. Work temperature range :1-45 ºC(33.8ºF-113ºF)

5 What’s the min. Order requirement ?
Min. Order requirement is 1PCS.

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only 1 motor, they are lightweight, compact, and easy to handle. Using 1 air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal 1 does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has 1 of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, 4 times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing 1 for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has 1 cylinder and 2 valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery 1 controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, 1 piston, and 1 air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage 1 is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting 2 output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure 20 to 40 PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least 40 to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as 50 percent on and 20-5 percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by 1 percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately 4 amps of power. A one-horsepower compressor would draw about 12 amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with 3 electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China CZPT Oil Lubricated Inject Rota Hot Sale Oil Free Screw Permanent Magnet VSD Oil Free CZPT Fixed Speed Direct Drive Screw Air Compressor China CZPT Oil Lubricated Inject Rota Hot Sale Oil Free Screw Permanent Magnet VSD Oil Free CZPT Fixed Speed Direct Drive Screw Air Compressor

China Oil and Oil Free Air Compressor Copper Wire Portable Movable Piston Oilless Silent Oil Free 1HP 2HP 3HP 9L 24L 25L 30L 40L 50L 100L 300L 500L Air Compressor

Product Description

Product Description

Oil Free Air Compressor
Features
Smart Body Design,High Performance,High Flow Output,Low Vibaration,Silent Motor,Well Balanced,Long Life,Suspensible Installation available,High Temperature Resisitant Rubber Valve Plate
Applications
Lab,Cosmetology Oxygen,Water recycle

 

Product Parameters

Packaging & Shipping

 1) Packing Details
Packed in nylon firstly, then carton, and then reinforced with wooden case for outer packing.Or according to client’s requirement.

2) Shipping Details
Samples will be shipped within 15 days.
Batch order leading time according to the actual situation.

Company Profile

ZHangZhoug Jinjin Motor Co., Ltd, located in Zeguo Town, HangZhou, HangZhou City, China, enjoys convenient land, sea and air transportation network.

We are specialized in air compressor, pneumatic tools and spray gun

For air compressore, there is oil free oiless air compressor and piston oil air compressore.

Spray gun include washing gun, tire inflating gun and accessory ets.

About pneumatic tools, there are air impact wrench series, pneumatic screwdriver series, air die grinder series, tire pressre gue, air angle sander.

We have obtained ISO90001-2008 quality certificate, CE certificate and CCC certificate. Our products are widely exported to over 50 countries and regions, such as east Europe, Southeast Asia, South America, Middle East, Africa etc. Meanwhile, we have kept well touch with many trading companies at home and abroad for cooperation relationship.

“Reliable quality, Excellent service, Reasonable price, Timely delivery” is our company persistent pursuit. Looking forward to be your long term business partner.

Installation Instructions

Detailed Photos

FAQ

Q:Why choose us?
A:professional manufacturer for 10 years;
  good quality material and advanced test machine

Q:What is your MOQ?
A:10 pcs is ok for each model.At first time,trial order is okay.

Q:What about your warranty?
A: 1 year,except man-made destroyed.

Q:how about your payment way ?
A: 30% T/T in advance,70% balance on sight of BL copy by T/T or irrevocable L/C.

Q:Can you make OEM/ODM order?
A:Yes,we have rich experience on OEM/ODM order.

How to Repair and Maintain an Air Compressor

A compressor is a device used to move air from 1 place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.

Positive displacement

Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are 2 types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the 2 types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
air-compressor

oil free

If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in 1 minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
air-compressor

double acting

A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
air-compressor

fuel tank pressure switch

You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.

energy source

The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require 3 separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require 3 separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.

China Oil and Oil Free Air Compressor Copper Wire Portable Movable Piston Oilless Silent Oil Free 1HP 2HP 3HP 9L 24L 25L 30L 40L 50L 100L 300L 500L Air Compressor China Oil and Oil Free Air Compressor Copper Wire Portable Movable Piston Oilless Silent Oil Free 1HP 2HP 3HP 9L 24L 25L 30L 40L 50L 100L 300L 500L Air Compressor