China Permanent Magnetic Synchronous Pm VSD Rotary Screw Air Compressor with Converter for Concrete Production

Product Description

I. Introduction:
 
Our variable frequency series screw compressor takes advantage of the stepless speed regulation of the frequency charger, and start screw air compressor gently through the controller or the PID regulator inside of the controller to improve the start and operation mode of the motor.
Prediction and evaluation of energy saving:
If the air compressor frequently upload and unload during the operation and particularly the steady pressure output is needed, it is necessary to use air compressor frequency changer to control air compressor to achieve the effect of energy saving in a certain range.
Steady pressure:
The air compressor frequency changer aims at a the larger fluctuations of air volume. Internal PID regulator can quickly adjust the response. Compared with the limit switch control of operating with motor in constant frequency, the stability of the air pressure output increases exponentially, keeping on a constant point.
Start with no impact:
For the frequency changer has the function of the soft start, the start-up current is 3 times lesser than the power frequency startup. So the impact of the startup is smaller.
Variable flow control:
Based on the PID regulator and the actual air consumption to adjust the motor speed at a real time, to control the emission output and to achieve a equilibrium air supply. When low consumption,  the air compressor can sleep automatically to reduce the energy loss. The optimized control  further improves the energy-saving efficiency.
Better voltage adaptability of AC power supply
Due to the over modulation technique used in frequency changer, while in low AC power supply voltage, it still outputs the enough torque to drive the motor to work. While in high AC power supply voltage, it will not lead to a higher voltage output to motor.

II. Technical specification
 

Model EV7.5A EV11A EV15A EV18.5A EV22A EV30A EV37A/W EV45A/W EV55A/W EV75A/W EV90A/W EV110A/W EV132A/W EV160A/W
Free air delivery/Discharge air pressure  (M3/min/ Mpa) 1.2/0.7 1.7/0.7 2.4/0.7 3.1/0.7 3.7/0.7 5.2/0.7 6.5/0.7 7.5/0.7 10.5/0.7 13.5/0.7 16.5/0.7 20.5/0.7 25.8/0.7 28.8/0.7
1.1/0.8 1.6/0.8 2.3/0.8 3/0.8 3.5/0.8 5/0.8 6.3/0.8 7.2/0.8 9.5/0.8 13/0.8 16/0.8 19/0.8 23/0.8 27/0.8
1/1.0 1.4/1.0 2.2/1.0 2.8/1.0 3.0/1.0 4.1/1.0 5.8/1.0 7.0/1.0 8.5/1.0 11/1.0 14/1.0 17.5/1.0 20.2/1.0 23.8/1.0
0.8/1.3 1.2/1.3 1.7/1.3 2.3/1.3 2.5/1.3 3.7/1.3 25.0/1.3 6.0/1.3 7.5/1.3 9.5/1.3 12/1.3 14/1.3 18/1.3 21/1.3
Air supply temperature ≤ambient temperature +8~`15ºC
Motor Power (kw/hp) 7.5/10 11/15 15/20 18.5/25 22/30 30/40 37/50 45/60 55/75 75/100 90/120 110/150 132/175 160/215
Start method Y-△Starter
Voltage (v/hz)                                              380V 3PH 50HZ     (380V-3PH-60HZ/ 460V- 3PH- 60HZ/ 220V- 3PH-60HZ/ 400V-3PH-50HZ/6000V-3PH-50HZ/other voltagesd can be customized )                                                                               
Drive method V-belt transmission / Coupling transmission
Oil content (PPM)  ≤3
Connector inch 3/4″ 3/4″ 1″ 1″ 1″ 1  1/4″ 1  1/4″ 1 1/2″ 1 1/2″ 2″ 2″ 2  1/4″ 2  1/2″ 2  1/2″
Noise(Db)±2  56 58 60 60 60 66 66 66 70 71 71 73 75 77
Dimension length mm 900 1060 1060 1080 1080 1300 1300 1300 1820 2440 2560 2760 2760 2860
width   mm 700 800 800 880 880 1100 1100 1100 1200 1300 1300 1340 1340 1510
height  mm 1040 1230 1230 1420 1420 1650 1650 1650 1600 1620 1620 1710 1710 1810
Weight (kg) 400 500 550 650 680 1000 1050 1100 1350 1800 2150 2900 3000 3800

III. CE & ISO Certificates:

Package photos:

On-site photos:

IV. Company Introduction

ZheJiang CZPT COMPRESSOR CO., LTD.  is 1 UK wholly-owned compressor company, which was situated in ZheJiang in 2004, based in technical cooperation with European air end manufacturer and British O.S.G. OSG ZheJiang specializes in manufacturing the world-class screw compressors and air purification equipments.
In order to meet customers’ expectations and requirements, OSG ZheJiang integrates the compressing system to embody the merits of reliability, energy saving, silence, convenience.  OSG ZheJiang had obtained the compressor production license (certificate No: XK06-571-0571), quality certificate and general machinery certificate, ISO 9001:2008 certificate and CE certificate.
 OSG has established a nation-wide service system of 40 offices, and provided comprehensive services, such as consulting, training, repairing, spare parts supplying, etc. OSG ZheJiang also do OEM for trading companies and agents, according to their requirements.
 OSG ZheJiang welcome customers and engineers all over the world to study, train and cooperate. Welcome to OSG ZheJiang .
 
 
V. Company Advantages
1.Enormous potentiality, long history
ZheJiang CZPT Compressor Co., Ltd. is 1 British wholly-owned enterprise. Currently in China, OSG has set up 3 major manufacturing bases (ZheJiang CZPT Compressor Co., Ltd, ZHangZhoug Ulite Tools Co.,Ltd., ZheJiang OSG welding), 5 Manufacturers. Meanwhile we cooperate with the European world-advance air end manufacturer. OSG ZheJiang possesses a complete production, sales and after-sales service system. OSG has 40 offices and more than 80 after-sales service centers, and products are sold to more than 20 countries.
 
2. Advanced configuration, world-renowned components, abundant production experience.
    The control system is the most advanced. The controller is designed and manufactured by Schneider, France. It is equipped with the large Chinese-English liquid crystal display screen. It can monitor more than 20 main operating parameters, and has the functions of fault recording, maintenance and alarm shutdown. It can achieve efficient intelligent control, unattended.
Remote control: the computer processor can directly check the user’s real-time operating system. Combine the reliability, energy saving, practicality in one. remote control can start, stop, load, unload the compressor and also other local control can be carried out. The operation, alarm and fault and relative local information can be monitored. (detailed description followed)
Remote control function:
Multiple compressors remote centralized control: reduce system pressure, reduce energy consumption, real-time monitoring.
Dual pressure setting: Two system pressure bands can be set manually or automatically to optimize energy use and reduce operating costs.
Delayed secondary shutdown: This function controls the motor to run only when needed, allowing the motor to run less and minimize the energy consumption.

Types of Air Compressors

There are many types of Air Compressors available on the market. Learn which 1 is right for your needs and what makes 1 better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which 1 you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.
air-compressor

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in 1 stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use 1 of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
air-compressor

Single-stage models

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use 2 stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, 1 piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the 2 pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

Low-noise models

Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These 2 features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
air-compressor

Oil-free models

A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated 1 include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China Permanent Magnetic Synchronous Pm VSD Rotary Screw Air Compressor with Converter for Concrete Production  China Permanent Magnetic Synchronous Pm VSD Rotary Screw Air Compressor with Converter for Concrete Production